Alhamdulillah Terimakasih Doanya :)




Thursday, March 21, 2013

How to setting speedy? It is simple

Masalah yang terjadi:

Lampu indikator internet speedyt menyala

No internet access 

Apa yang harus dilakukan?

Nyalakan modem

Masuk ke Mozilla 

Masukkan Url address 192.168.1.1

User: admin

password : admin

                     kosong 

Setting seperti dibawah ini

 

 

ADSL Modem SMC

  • Default IP: 192.168.2.1
  • Default password: smcadmin

Setting Bridge:

  1. Klik WAN
  2. Klik ATM PVC
  3. Klik VCI
  4. Protocol: 1483 Bridging, VLAN: Default, VPI/VCI: 8/81, Encapsulation: LLC, Qos Class: UBR, PCR/SCR/MBS: 4000/4000/10
  5. Klik Save Settings

Setting PPPoE:

  1. Klik WAN
  2. Klik ATM PVC
  3. Klik VCI
  4. Protocol: PPPoE, VPI/VCI: 8/81, Encapsulation: LLC, QoS Class: UBR, PCR/SCR/MBS: 4000/4000/10, IP assigned by ISP: Yes, IP Address: 0.0.0.0, Subnet Mask: 0.0.0.0, Connect Type: Always Connected, Idle Time (Minute): 5, Username: (nomor speedy)@telkom.net, Password: (password dari telkom), Confirm Password: , MTU: 1492
  5. Klik Save Settings

ADSL Modem ZyXeLP-660R

  • Default IP: 192.168.1.1
  • Default username: admin
  • Default password: 1234

Setting Bridge:

  1. Pilih Network
  2. Pilih WAN
  3. Mode: Bridge, Encapsulation: RFC 1483, Multiplexing: LLC, VPI: 8, VCI: 81, Apply
  4. Pilih Maintenance
  5. Pilih Tools
  6. Restart

Setting PPPoE:

  1. Pilih Network
  2. Pilih WAN
  3. Mode: Routing, Encapsulation: PPPoE, Username: ( nmrspeedy@telkom.net), Password: (password speedy), Service Name: Speedy, Multiplexing: LLC, VPI: 8, VCI: 81, IP Address: Obtain an IP Address Automatically, Connection: Nailed-Up Connnection, Apply
  4. Pilih Maintenance
  5. Pilih Tools
  6. Restart

ADSL Modem Shiro

  • Default IP: 192.168.1.1
  • Default username: admin
  • Default password: admin

Setting Bridge:

  1. Klik Advanced
  2. Klik WAN
  3. Klik New Connection
  4. Connection Name: Speedy, Type: Bridge, VPI: 8, VCI: 81, and Submit
  5. Save Settings
  6. Restart Router

Setting PPPoE:

  1. Pilih Advanced
  2. Klik WAN
  3. Klik New Connection
  4. Connection Name: Speedy, Type: PPPoE, Sharing: Enable, Encapsulation: LLC, Username: (nomor speedy)@telkom.net, Password: (password dari telkom), VPI: 8, VCI: 81, and Submit
  5. Save Settings
  6. Restart Router

ADSL Modem Aztech

  • Default IP: 192.168.1.1
  • Default username: admin
  • Default password: admin

Setting Bridge:

  1. Klik Advanced
  2. Klik WAN
  3. Klik New Connection
  4. Connection Name: Speedy, Type: Bridge, VPI: 8, VCI: 81, and Submit.
  5. Save Settings
  6. Restart Router

Setting PPPoE:

  1. Pilih Advanced
  2. Klik WAN
  3. Klik New Connection
  4. Connection Name: Speedy, Type: PPPoE, Sharing: Enable, Encapsulation: LLC, Username: nmrspeedy@telkom.net, Password: (password dari telkom), VPI: 8, VCI: 81, and Submit.
  5. Save Settings
  6. Restart Router

Cukup mudah bukan? jika kurang jelas bisa ditanyakan dibawah ini :)


Incoming search
cara setting speedy
bagaimana cara setting router speedy
no internet access speedy
Lampu indikator internet speedy tidak menyala 

0 comments:

Post a Comment

Silahkan berkomentar yang sopan. Kritik untuk tujuan membangun.